Do you have a question about the Sony STR-ZA2000ES and is the answer not in the manual?
Channels | 7.2 |
---|---|
Power Output | 100 W per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD) |
HDMI Outputs | 2 |
4K Support | Yes |
Dolby Atmos | Yes |
DTS:X | Yes |
HDCP Support | HDCP 2.2 |
Frequency Response | 10 Hz - 100 kHz |
Total Harmonic Distortion | 0.09% |
Bluetooth | Yes |
Wi-Fi | Yes |
Ethernet | Yes |
HDMI Inputs | 6 |
HDR Support | Yes |
Zone Output | Zone 2 |
Inputs | HDMI |
Outputs | 2 x HDMI |
USB | Yes |
Supported Audio Formats | DSD, LPCM, Dolby TrueHD, DTS-HD Master Audio, DTS:X |
Dimensions | 17 x 6.75 x 13.5 inches |
Steps for turning on the receiver and completing the initial setup process.
Detailed configuration of speaker system parameters and automatic calibration.
Configuring network connectivity and optimizing audio playback settings.
Managing HDMI connections, scaling, and device control features.
Configuring multi-zone audio, system preferences, and installation settings.
Performing simplified setup and basic maintenance procedures.
Guidance for resolving errors, power, image, and sound problems.