Sony STR-ZA2000ES - Using Other Video;Audio Input Jacks (Input Assign)

Depending on the input, [Input Mode] may be dimmed on the TV screen and other modes
cannot be selected.
When [2ch Analog Direct] is being used, audio input is set to [Analog]. You cannot select
other modes.
[51] Using Other Features
Configuring video and sound settings
Using other video/audio input jacks (Input Assign)
You can reassign video and/or audio signals to other input jacks if the default settings of the
jacks do not correspond to your connected device.
E.g. When connecting a DVD player to the OPTICAL IN 1 (AUX) and COMPONENT VIDEO
IN 2 (VIDEO) jacks of the receiver:
Assign [BD/DVD] to the OPTICAL IN 1 (AUX) jack.
Assign [BD/DVD] to the COMPONENT VIDEO IN 2 (VIDEO) jack.
1. Select [Setup] - [Input Setup] from the home menu.
2. Select [BD/DVD].
3. Press repeatedly to select [COAX] under [OPTICAL / COAXIAL] and /
repeatedly to select [OPT 1].
4. Press repeatedly to select [IN 1] under [COMPONENT] and / repeatedly to
select [IN 2].
Assignable HDMI input jacks (for STR-ZA3000ES/STR-ZA2000ES)
IN 1:
BD/DVD (*), SAT/CATV, GAME, STB, VIDEO, AUX, TV, SA-CD/CD
IN 2:
BD/DVD, SAT/CATV (*), GAME, STB, VIDEO, AUX, TV, SA-CD/CD
IN 3:
BD/DVD, SAT/CATV, GAME, STB (*), VIDEO, AUX, TV, SA-CD/CD
IN 4:
BD/DVD, SAT/CATV, GAME, STB, VIDEO (*), AUX, TV, SA-CD/CD
IN 5:
BD/DVD, SAT/CATV, GAME, STB, VIDEO, AUX, TV, SA-CD/CD (*)
IN 6: