feet: The distance is displayed in feet.
[76] Adjusting Settings Network Setup
Setting up a network (Internet Setup)
You can set up a wired LAN connection by the following procedure.
1. Select [Setup] - [Network Setup] from the home menu.
2. Select [Internet Setup].
3. Select [Auto].
4. Select [OK].
The receiver starts connecting to the network. For details, refer to the messages that
appear on the TV screen.
If using a fixed IP address
Select [Manual] in step 3. The IP address input display appears on the TV screen.
Enter the value for [IP Address] using the on-screen keyboard. Press / / / and
to select the characters one by one, then select [Enter] to confirm the values.
Enter the values for [Subnet Mask] and [Default Gateway], then select [Next].
Hint
See [Information] when checking the network settings.
[77] Adjusting Settings
Network Setup
Checking the network information (Information)
1. Select [Setup] - [Network Setup] from the home menu.
2. Select [Information].
You can check the settings (*) for [Connection Status], [IP Address Setting], [IP
Address], [Subnet Mask], [Default Gateway], and [MAC Address].
*
The setting items during setup differ depending on the network environment and connection type.
To Next Page
Loading...
