About Custom Preset [52]
Recalling the settings saved to the scene [53]
Saving the settings to a preset [54]
Items for which you can save settings and the default values for each item [55]
Configuring speaker settings
Adjusting the sound balance automatically (Auto Calibration) [56]
Using bi-amplifier connections [57]
Using the sleep timer
Using the sleep timer (Sleep) [58]
Checking information on the receiver
Viewing information on the display panel [59]
Adjusting Settings
Input Setup
Changing the assignment and display for the input jacks [60]
Changing the name for each input (Name) [61]
Speaker Setup
Performing automatic calibration (Auto Calibration) [62]
Calibrating the phase characteristics of the speakers (Automatic Phase Matching) [63]
Selecting the Auto Calibration type (Calibration Type) [64]
Selecting the speaker pattern (Speaker Pattern) [65]
Setting the assignment for the speaker terminals (SB Speaker Assign) [66]
Adjusting the speaker size (Size) [67]
Adjusting the speaker distance (Distance) [68]
Adjusting the speaker level (Level) [69]
Outputting a test tone from each speaker (Test Tone) [70]
To Next Page
Loading...
