The above explanations are intended to serve as examples.
[128] Announcements
Specifications
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION (for USA
and Canadian models only):
STR-ZA3000ES
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts
to rated output.
STR-ZA2000ES
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts
to rated output.
STR-ZA1000ES
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts
to rated output.
Amplifier section
STR-ZA3000ES
POWER OUTPUT (*1) (*2)
Rated Power Output at Stereo Mode
(6 ohms 20 Hz – 20 kHz, THD 0.09%): 100 W + 100 W
Reference Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%): 80 W + 80 W
Reference Power Output
(6 ohms 1 kHz, THD 0.9%)
FRONT: 120 W + 120 W
CENTER: 120 W
To Next Page
Loading...
