Preset Volume: Select the default volume for Music Connect input.
Output Zone: Select the output zone of the Hi-Fi System device.
Note
For details on how to configure settings for this function, consult your nearest Sony
dealer.
[80] Adjusting Settings
Audio Setup
Playing audio signals with high-quality sound (Digital
Legato Linear (D.L.L.))
The D.L.L. function is Sony proprietary technology that allows low-quality digital and analog
audio signals to be played with high-quality sound.
1. Select [Setup] - [Audio Setup] from the home menu.
2. Select [Digital Legato Linear].
3. Select the setting you want.
Auto 1: This function is available for lossy compression audio formats and analog
audio signals.
Auto 2: This function is available for Linear PCM signals, as well as lossy
compression audio formats and analog audio signals.
Off
Note
This function works when [2ch Stereo], [A.F.D.] or [Multi Stereo] is selected. However,
this function does not work in the following cases:
The [In-Ceiling Speaker Mode] function is being used.
[FM TUNER] or [AM TUNER] is selected as the input.
Linear PCM signals with a sampling frequency other than 44.1 kHz are being received.
Dolby Digital Plus, Dolby Digital EX, Dolby TrueHD, DTS 96/24, DTS-ES Matrix 6.1, DTS-HD
Master Audio, or DTS-HD High Resolution Audio signals are being received.
When zone 2 is on (depending on the zone 2 or HDMI settings).
To Next Page
Loading...
