2. Select [Subwoofer Level].
3. Select the setting you want.
Auto: Automatically sets the level to 0 dB or +10 dB, depending on the audio
stream.
+10 dB
0 dB
[96] Adjusting Settings HDMI Setup
Selecting the method to use the HDMI OUT B jack
(HDMI Out B Mode)
The HDMI OUT B jack can be used for zone 2.
1. Select [Setup] - [HDMI Setup] from the home menu.
2. Select [HDMI Out B Mode].
3. Select the setting you want.
Main : Uses the jack for HDMI OUT B. Recommended when you enjoy TV or
projector content in only one room (main zone).
Zone2 : Uses the jack for zone 2. Recommended when you enjoy video and sound
from a device connected to the receiver in a zone other than the main zone (zone 2).
Note
When [Zone2] is selected, the Control for HDMI function and Fast View function do not
work.
When [Main] is selected, HDMI IN audio signals cannot be output to zone 2 speakers and
the PRE OUT jacks unless the input for zone 2 is SOURCE or the same input is selected
in the main zone and zone 2.
[97] Adjusting Settings
HDMI Setup
Setting the priority for the main zone (Priority)
To Next Page
Loading...
