Sony Tektronix WFM 1125 User Manual

Reference
3-10
WFM 1125 Option 0A/0B/0C/0D User Manual
Digital Intensity
The digital intensity feature displays waveforms in two-valued level (no
grey-scale) when the intensity of the waveform is set to maximum. With this
feature, you can avoid missing specific waveform phenomena due to lack of trace
intensity.
Use the following steps to display waveforms in two-valued level.
1. Press the INTEN/MENU button on the front panel.
2. Press the WAVEFORM bezel button.
3. Turn the SELECT knob clockwise until it stops to display waveforms in
two-valued level.
Graticules
The waveform monitor has four waveform display mode graticules: millivolt,
percent, full millivolt, and full percent.
To select a graticule for waveform display mode, follow the steps below. (For
information on how to move the highlight from column to column in the menu,
refer to Using the Menus on page 2–9.)
1. Press the INTEN/MENU button on the front panel.
2. Choose one of the waveform display modes in the SCALE menu. Available
options are mV, %, FULL mV, and FULL %.

Sony Tektronix WFM 1125 Specifications

General

Brand	Sony
Model	Tektronix WFM 1125
Category	Measuring Instruments
Language	English