Appendix C: Cleaning & Service
WFM 1125 Option 0A/0B/0C/0D User Manual
C-3
Repackaging for Shipment
To ship the waveform monitor to a Tektronix Service Center for service, follow
these instructions:
1. Attach a tag showing the name of the owner, the complete address, the phone
number, the instrument serial number and a description of the required
service.
2. Repackage the waveform monitor in the original packaging materials. If the
original packaging materials are not available, follow these instructions:
a. Obtain a carton of corrugated cardboard having inside dimensions at
least six inches greater than the dimensions of the instrument. Use a
shipping carton that has a test strength of at least 275 pounds.
b. Surround the instrument with a protective bag (anti-static preferred). For
instruments that are not in a cabinet, wrap a cardboard piece around the
bagged instrument to protect internal components.
c. Pack dunnage or urethane foam between the instrument and the carton. If
using Styrofoam kernels, overfill the box and compress when closing the
lid. You need three inches of cushioning on all sides of the instrument.
3. Seal the carton with shipping tape or industrial staples.
To Next Page
Loading...
Need help?
General
