Sony Trinitron BVM-A32E1WU - Menu Structure

29
Menu Structure
Chapter 2 Menu
Menu Structure
The main menu and Level 1 are shown below.
Detailed information on the menu levels is described at the
top of each menu explanation.
Main menu Level 1 Functions
PICTURE ADJ [A] Adjusts the picture. (page 31)
PRESET VALUE Selects the preset data to be adjusted. (page 31)
AUTO [A1] Sets the chroma/phase/matrix automatically. (page 32)
MANUAL ADJUST [A2 ] Sets the preset values for the phase/chroma/brightness/contrast
with the MANUAL adjustment knob. (page 32)
COPY FROM [A3] Copies the other picture preset data. (page 33)
COLOR TEMP ADJ [B] Adjusts the color temperature. (page 33)
PRESET VALUE Selects the color temperature data to be adjusted. (page 34)
MANUAL [B1] Sets the color temperature with the MANUAL knob. (page 34)
AUTO [B2] Sets the color temperature automatically. (page 35)
COPY FROM [B3] Copies the other color temperature. (page 36)
RESTORE FACTORY DATA [B4] Resets the color temperature. (page 36)
ANALYZE [B5] Reads the color temperature and luminance value. (page 36)
INPUT CONFIGURATION [C] Sets the data for the input signals. (page 37)
CHxx Current channel is indicated. (page 38)
FORMAT [C1] Selects the signal format. (page 39)
SLOT NO Selects the slot number. (page 38)
INPUT NO Selects the input connector number. (page 38)
SCREEN ASPECT Sets the aspect ratio. (page 38)
SCAN SIZE Sets the scan size. (page 38)
SYNC MODE Sets the sync signal. (page 38)
COLOR TEMP Selects the color temperature. (page 38)
PICTURE PRESET Selects the picture adjustment preset. (page 39)
MATIRIX [C2] Sets the matrix of the signal system. (page 40)
APERTURE Chooses whether to use aperture adjustment or not. (page 39)
VALUE Enters the aperture adjustment value. (page 39)
YC SEP Selects Y/C separation filter. (page 39)
NTSC COMB FILTER Sets the NTSC COMB ilter. (page 39)
MARKER DISPLAY Chooses whether or not to display the marker. (page 39)
MODE [C3] Sets the marker aspect, safe area, safe title, etc. (page 40)
H PHASE Adjusts the horizontal picture position. (page 39)
CHANNEL NAME [C4] Sets the channel name. (page 42)
COPY FROM [C5] Copies the data from other channel. (page 42)