Sony Trinitron CPD-E530 Service Manual

CHASSIS
SERVICE MANUAL
SPECIFICATIONS
CPD-E530
CR1
AEP Model
Chassis No. SCC-L33T-A
TRINITRON ® COLOR GRAPHIC DISPLAY
CRT
0.24 mm aperture grille pitch, 90-degree deflection, FD Trinitron
21 inches measured diagonally
Viewable image size
Approx. 403.8 × 302.2 mm (w/h) (16 × 12 inches)
19.8" viewing image
Resolution (H:Horizontal, V:Vertical)
Maximum: H: 2048 dots, V: 1536 lines
Recommended: H: 1600 dots, V: 1200 lines
Input signal levels
Video signal: Analog RGB: 0.700 Vp-p (positive), 75 Ω
SYNC signal: H/V separate or composite sync:
TTL 2 kΩ, Polarity free
Sync on Green: 0.3 Vp-p (negative)
Standard image area
Approx. 388 × 291 mm
(15
3
/8 × 11
1
/2 inches) or
Approx. 364 × 291 mm
(14
3
/8 × 11
1
/2 inches)
Deflection frequency*
(H:Horizontal, V:Vertical)
H: 30 to 117 kHz, V: 48 to 170 Hz
AC input voltage/current
100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power Consumption
Approx. 135 W
Operating temperature
10 ºC to 40 ºC
Dimensions Approx. 497 × 502 × 485 mm (w/h/d)
(19
5
/8 × 19 × 18
7
/8 inches)
Mass Approx. 30 kg (66 lb 2 oz)
Plug and Play DDC2B/DDC2Bi, GTF**
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.3 µsec.
• Vertical blanking width should be more than 450 µsec.
** If the input signal is Generalized Timing Formula (GTF) compliant, the
GTF feature of the monitor will automatically provide an optimal
image for the screen.

Sony Trinitron CPD-E530 Specifications

General

Brand	Sony
Model	Trinitron CPD-E530
Category	Monitor
Language	English