4
Maintenance
Cleaning the Artisan
TM
Sensor
The sensor may not adhere to the screen well if the suction cups have dirt or oil attached to them. Clean the sensor’s suction
cups with a lint-free cloth slightly moistened with water.
Cleanliness of the Artisan
TM
Sensor’s window (located in the center of the underside of the Artisan
TM
Sensor) is crucial to
proper calibration results. When the sensor is not in use, keep it stored in its carrying case. If it becomes necessary to clean
this window, do so with a lint-free cloth slightly moistened with water.
Transportation
When transporting, use the original carton and packing materials.
To Next Page
Loading...
