Sony Trinitron KV-13VM30 - Page 32

Using
the
Timer-Activated
Functions
Press
A+
or
V-
to
set
the
channel
that
you
want
the
TV
to
tune
in.
Each
time
you
press
A+
or
V7-,
the
channel
number
changes
in
sequence.
” (KK
ge
__ Press RETURN.
The setting is completed.
ON/OFF TIMER
EVERY MON-FRI
3:15PM 2h CH21
> MENU
Select the channel
Use $ Exit (Ng
ON/OFF TIMER
RETURN EVERY MON-FRI
3:15PM 2h CH21
>» MENU
Use $ Exit
Cancelling the ON/OFF TIMER
Select
the
ON/OFF
TIMER
screen
(Refer
to
pp.
30
-
32).
Press
RETURN.
“EVERY
SUN-SAT’
will
appear
in
red.
2 Press BACK SPACE to erase the ON/OFF TIMER.
BACK
SPACE
ON/OFF TIMER
>» EVERY SUN-SAT
12:00AM -h CH----
> MENU
Use $ [RETURN Exit (MENG
To
Change
or
Correct
Setting
the
ON/OFF
TIMER
:
Before completing it
Press
BACK
SPACE
to
return
to
the
item
to
be
changed
or
corrected.
When
it
is
displayed
in
red,
set
it
again
by
using
the
A+
or
V-.
After completing it
Select the ON/OFF TIMER screen.
Then,
press
RETURN
to
return
to
the
item
to
be
changed
or
corrected.
When
it
is
displayed
in
red,
set
it
again
by
using
the
A+
or
V-.
Chapter 3 : Using Advanced TV reatures
32
* One minute before the timer goes off, the
“TV will turn off” will appear on the
screen.
* ‘f you have not set the clock correctly, the
ON/OFF TIMER will not operate at the
proper time. To set the clock, see “Setting
the Clock-AUTO CLOCK SET/MANUAL
CLOCK SET,” pp 25-29.
¢ All the settings including ON/OFF TIMER
will be erased if you unplug the VIDEO TV
or a power failure occurs. Reset the
TIMER by following steps 1-9.
Fig. 1
Selecting the day(s) of the week
When you press A+, the days of the week
appear in the following order.
—p [| EVERY MON-SAT
A Y
EVERY MON-FRI
Y
A Y
— akin
EVERY a ae
fee ate
eee oR] ae
A SATURDAY “s
(VY -: reverse order)
EVERY SATURDAY
EVERY FRIDAY
To return to the normal screen
Press MENU.
lf “RESET CHANNEL BLOCK AND TRY
AGAIN” appears on the screen when you
completed the setting of the ON/OFF
TIMER.
The ON/OFF TIMER setting overlaps the
setting of the day, time, duration and
channel of the CHANNEL BLOCK.
Change the setting of the CHANNEL
BLOCK or the channel setting of the
ON/OFF TIMER .