Sony Trinitron KV-13VM30 - Page 53

Index Function =>
INDEX signal marks on the tape let you scan through the start of different programs
or search for a specific section of tape.
Marking INDEX Signals
Automatic INDEX mark
An INDEX signal is automatically marked at the beginning of recording.
te, ¢
= .
Manual INDEX mark
INDEX signals can be marked at any desired point during any recording or normal
playdack,.
OOo
Press INDEX once.
INDEX 00 appears.
INDEX
BACK —
SPACE Ee)
Cru
vcr
Pugs TIMER ON SCREEN CLE.
Then press MARK at the point where you want to mark INDEX signal. INDEX
MARK appears on the screen.
INDEX MARK
— 1 SLOW ——
MARK
¢ Leave an interval of more than 2 minutes between INDEX signals when marking them one
after the other so that the VCR can detect them correctly.
¢ While an INDEX signal is being marked during playback, the recorded sound will not be
heard, but it will not be erased. -
* You cannot mark an INDEX signal in the following cases:
RM-Y138/W - Ona tape without safety tab.
- On an unrecorded portion of a tape.
- Immediately before a point on the tape where the tape speed changes.
Chapter 5 : Using Advanced VCR Features 53
uolaun4 xapu|
Huilpsooay Jawly ¥9IND