Sony Trinitron KV-13VM30 - Page 84

Using the Timer-Activated Functions
SOOO)
© O60
[oy
28 gz 28
CT2}3©O © GO 0 C [20
ia} fe}
¢
z 4 m 2
RESET
TAPE
BACK
‘SPACE LZ]
COu
vcr
Phusy TIMER ON SCREEN
INDEX MARK
—+ stow —
RM-Y138/W
26 Chapter 3 : Using Advanced TV Features
Press RETURN then select FULL AUTO by using A+ or V-.
Press RETURN again.
RETURN (R) (£0
is available,
es the clock is set auto-
matically
(L) : with leaving the TV off
When clock data service
7 To activate the Auto Clock Set function, turn the TV off.
The VIDEO TV automatically sets the clock.
The VIDEO TV automatically searches for a channel that carries a time signal
and sets your time zone and daylight saving time (if applicable). \f your clock
sets, but displays the wrong time zone or daylight saving time, you can adjust
these settings by following the steps below.
If the clock is not activated
1 Follow steps 1 to 5 above.
Press RETURN then select OPTIONS by using A+ or 7-.
Press RETURN again.
CURRENT TIME SET CH
The CURRENT TIME SET CH screen appears. > AUTO MANUAL
RETURN (R) (£e [CH---]
as |
Use $ (RETURN Exit
(L)
3 Press RETURN, then press A+ or V- to select AUTO or MANUAL.
If you select AUTO: CURRENT TIME SET CH
The VIDEO TV automatically searches b AUTO MANUAL
for a channel that carries a time ° [CH---]
signal.
MENU)
If you select MANUAL:
Set a channel that carries a time CURRENT TIME SET CH
signal using the number buttons. > AUTO MANUAL
Use this option if you know that [CH---]
i Push 0-9 keys to set
channel. Most PBS member stations BURAENT TE foe cheek
broadcast a time signal. For the Then push RETURN
fastest response, set the VIDEO TV to Use $ EUR Exit
your local PBS station.