Sony Trinitron KV-13VM30 - Page 85

=>
4 Press RETURN.
YOUR TIME ZONE AND ¢ Select STANDARD, if the DAYLIGHT
The YOUR TIME ZONE AND DAYLIGHT SAVING TIME — | DANIAGHT SAVING TIME SAVING TIME is not performed in your
screen appears. area.
RETURN « When you connect another VCR to the
VHF/UHF antenna terminal, if VCR's tape
is transmitted wrong time signal, your
Use Exit VIDEO TV automatically sets the clock by
the time signal of the tape.
Not to set the clock by the time signal of
VCR:
5 Press RETURN, then press A\+ or V7- to select AUTO or MANUAL. Turn your VIDEO TV off after having
tunned VCR off or Set the clock manuaily
: YOUR TIME ZONE on your VIDEO TV.
If you select AUTO: S RILANTIC
The VIDEO TV automatically sets your EASTERN
: f : ; ; CENTRAL
time zone and daylight saving time (if MOUNTAIN
applicable).
ALASKA
HAWAII
Use Exit
If you select MANUAL: DAYLIGHT SAVING TIME
1. Press RETURN, then set the time > STANDARD TIME
zone of your area using A+ or \7-. Pere earners
2. Press RETURN, then select
STANDARD TIME or DAYLIGHT
SAVING TIME using A+ or V-. Use ¢ Exit
6 Press RETURN.
RETURN
7 To activate the Auto Clock Set function, turn the TV off.
¢ If AUTO CLOCK has been set when you turn
the VIDEO TV on, the display witl appear as
shown right. When the display does not appear
as shown right even though AUTO CLOCK has
been set: using the Manual Clock Set stops the
automatic channel search when your set is
power off. If the Auto Clock Set feature is not in 11:30 AM
use, the channel search is not performed when AUTO CLOCK
your set is power off.
olf you set the clock manuaily, the display will
appear as shown right.
12:00 AM
3/11 FRI
Chapter 3 : Using Advanced TV Features 27
SUOITOUNY payeAljoy-sawl] ayy Busy