Sony TRINITRON KV-DA29M81 - 6 Circuit Adjustments; Adjustment with Commander

– 15 –
KV-DA29M81
RM-W105
SECTION 6
CIRCUIT ADJUSTMENTS
6-1. ADJUSTMENTS WITH COMMANDER
Service adjustments to this model can be performed using the supplied remote commander RM-W105.
a. ENTERING SERVICE MODE
With the unit on standby
This operation sequence puts the unit into service mode.
This screen display is:
b. METHOD OF CANCELLATION FROM SERVICE MODE
Set the standby condition (Press [POWER] button on the commander), then press [POWER] button again, hereupon it
becomes TV mode.
c. METHOD OF WRITE INTO MEMORY
1. Set to Service Mode.
2. Press 1 (UP) and 4 (DOWN), to select the adjustment item.
3. Change item by pressing 3, 6.
4. Press [MUTING] button to indicate WRITE on the screen.
5. Press - button to write into memory.
item no. service data NVM service field channel no./
category in decimal item name in decimal NG command frequency video input name
WHBL 000 BKOR 000 x SERVICE 50 S VIDEO 1
software service data reserved power on time
release ID version in binary for factory color system (decimal)
CGA01 0.16M 0000 0000 FF FF NTSC3 00100
S_ _ : for SONY
A_ _ : for AIWA
L_ _ : BX1L Full
B_ _ : BX1L Basic
D_ _ : DVD Combo
C_ _ : CX1
Z_ _ : Sound special
_ _ _01 : Serial no. of the M/P release for each
destination
_ _ _10 ~: use for FY04 BX1
_ _SB : Sub Hercules
t [DISPLAY] t 5 t [VOL $+% ] t [POWER]
1, 4 Select the adjustment item.
r
3, 6 Raise/lower the data value.
r
[MUTING] Writes.
r
- Executes the writing.
For BP Board Version; and PF Engine Version;
Category and release ID will be different.
The rest are the same.
BP Board Version
item no. item
category in decimal name
SUBP 000 10XH
software
release ID version
CBP01 0.06
PF Engine Version
item no. item
category in decimal name
9090 000
software
release ID version
PF 0018M