Sony VPL-CW255 - Page 42

42
Specifications
*1: For details, refer to “Acceptable Input Signals” on page 44.
*2: Information on accessories in this manual is current as of December 2011.
Design and specifications of the unit, including the optional accessories, are subject to change
without notice.
Standby power 100 V AC: 3 W (when “Standby Mode” is set to
“Standard”)/0.5 W (when “Standby Mode” is set to
“Low”)
240 V AC: 3 W (when “Standby Mode” is set to
“Standard”)/0.5 W (when “Standby Mode” is set to
“Low”)
Heat dissipation 100 V AC: 1195 BTU
240 V AC: 1126 BTU
Standard
dimensions
(W/H/D)
Approx. 406 × 122.3 × 330.5 mm (15
31
/32 × 4
13
/16 ×
13 inches)
Approx. 406 × 113 × 330.5 mm (15
31
/32 × 4
7
/16 ×
13 inches) (without projecting parts)
Mass Approx. 5.4 kg (11 lb 15 oz)
Supplied
accessories
See “Checking the Supplied Accessories” in the supplied
Quick Reference Manual.
Optional
accessories
*2
Projector Lamp LMP-C240 (for replacement)
Item Description
Model VPL-CX235/VPL-CW255
Notes
Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE
FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.