How do I fix 'Frequency is out of range!' on my Sony VPL-HS50?
To resolve the 'Frequency is out of range!' message on your Sony Projector, input a signal that falls within the projector's acceptable frequency range. You can also set the output signal on the connected computer's external monitor to SVGA. Additionally, ensure that “Input-A Signal Sel.” in the Setup menu is set to “Computer.”
How to brighten the picture on my Sony VPL-HS50?
If the picture on your Sony Projector is too dark, adjust the contrast or brightness in the “Adjust Picture” settings of the Picture menu.
What does it mean when the LAMP/COVER light is on my Sony VPL-HS50?
If the LAMP/COVER light is illuminated on your Sony Projector, it means you should replace the lamp. Alternatively, you can wait until the lamp cools down, and then try turning the power on again.
How to make the picture clearer on my Sony Projector?
To improve picture clarity on your Sony Projector, adjust the focus using the focus ring. If that doesn't fully resolve the issue, leave the projector powered on for about two hours.
What to do if the remote control for my Sony VPL-HS50 Projector does not work?
If the remote control for your Sony Projector isn't working, try replacing the batteries with new ones. Ensure that you insert the batteries with the correct polarities.
Why is there no picture on my Sony VPL-HS50 Projector?
If you're not seeing a picture on your Sony Projector, first, verify that all connections are properly made. Next, make sure you've selected the correct input source using the INPUT button. If you're using a computer, ensure the computer signal is set to output from an external monitor, or only to an external monitor. Also, check the Setup menu and select the appropriate option (“Computer,” “Component” or “Video GBR”) for “Input-A Signal Sel.” based on your input signal.
Why is the picture from the INPUT A connector colored strange on my Sony VPL-HS50 Projector?
If the picture from the INPUT A connector is displaying strange colors on your Sony Projector, select the appropriate option (“Computer,” “Component” or “Video GBR”) for “Input-A Signal Sel.” in the Setup menu according to the input signal.
Why does the picture from the VIDEO or S VIDEO INPUT connector look strange on my Sony VPL-HS50?
If the picture from the VIDEO or S VIDEO INPUT connector appears colored strangely on your Sony Projector, try adjusting the picture settings in the “Adjust Picture” section of the Picture menu. Also, ensure that the “Color System” setting in the Setup menu matches the color system being input.
Safety guidelines for preventing fire, shock hazards, and proper handling.
Instructions to prevent internal heat build-up and ensure proper cooling.
Guidance on choosing installation locations using the lens shift feature.
Instructions for connecting various video sources like DVD players and computers.
Steps to adjust picture size and position using projector controls and remote.
Basic steps to display an image, adjust focus and size.
Solutions for common projector problems like power, picture, and display issues.
Step-by-step guide for safely replacing the projector lamp.
General| Display Technology | LCD |
|---|---|
| Resolution | 1280 x 720 (720p) |
| Contrast Ratio | 6000:1 |
| Lens Shift | Yes |
| Brightness | 1000 ANSI lumens |
| Lamp Life | 2000 hours |
| Inputs | HDMI, Component, Composite, S-Video |
| Projection Size | 40 to 300 inches |
| Throw Distance | 1.5 m to 10 m |
To Next Page
