ENGLISH – 33
8.6. PACEMAKER IDENTIFICATION
The pacemaker can be interrogated and programmed via telemetry,
using the programming head interfaced with the Sorin CRM
dedicated programmer.
The device can be non-invasively identified as follows:
1. Take an x-ray to identify the name of the manufacturer printed on the
device (S = Sorin CRM ; P = Pacemaker ; K = Reply DR model).
2. Interrogate the device using the Sorin CRM dedicated
programmer. The model and serial number of the device are
automatically displayed. The first figure in the serial number
corresponds to the last figure in the year of manufacture.
To Next Page
Loading...
