SVP 0/1/2/3-E - Code: 3529.0091.01
Technical Assistance Service
1.3 User instructions and warnings
The manufacturer declines all liability for injury to persons or animals and
damage to property resulting from the failure to observe the
recommendations for the use and maintenance of the machine as specified
z
the machine for uses and/or loads other than those indica-
z
z
on a daily basis of all safety devices, oil levels and
general condition of the machine.
z
z
the machine thoroughly every day.
z
z
suitable measures and precautions to make sure that the machine
cannot be started by other persons - even accidentally - while loading,
adjusting, changing parts, cleaning, repairing or servicing the machine.
z
z
the safety guards and safety devices on the
z
z
the guards and the safety devices unless strictly
necessary for operational requirements and after having taken all the
necessary measures to minimise risks deriving from such action as descri-
bed in detail in this handbook.
z
z
all guards and safety devices as soon as the reasons that cal-
led for their temporary removal are no longer applicable.
z
OBSERVE THE FOLLOWING REGULATIONS
regulations on safety notices and warnings as stated in DD.PP.RR. 27/4/55,
n° 547 and n° 524 of date 8/6/82 and in D. Lgs 493/96 for Italy, or equivalent
regulations in the country where the machine is used;
European directives concerning workplace safety as stated in 89/391/CEE,
89/654/CEE, 89/655/EEC, 89/656/EEC, 90/269/EEC, 90/270/EEC,
90/394/EEC, 90/679/EEC, 95/63/EEC;
European directives concerning individual protection measures as stated in
89/656/EEC and 89/686/EEC;
European directives on the environment, with special regard to
concerning waste disposal,
/EEC on the disposal of dangerous waste
and 75/439/EEC on the disposal of used oils.
z
of the specific hazards present in the work-
To Next Page
Loading...
