Use with Mobile Phone | 19 18 | Pairing
2.2 Pairing your SoundGear devices
to your Android device
1. Locate, then tap the Settings icon on
your device.
2. Select Bluetooth.
3. In this screen, if Bluetooth appears Off,
change the setting to On. While the
Android device searches for the
SoundGear devices, press and hold the
power button to power the devices on
(approx. 5 seconds). This will put the
devices in pairing mode for 3 minutes
after turning on.
4. Tap the name of each SoundGear device
to connect each SoundGear device to the
Android device.
2.3 Mobile Phone Use
Your SoundGear devices are designed to
work with a smartphone. When SoundGear
devices are powered on and paired with an
MFi-compatible iOS device or an ASHA-
compatible Android device, incoming phone
calls and other audio will route automatically
to your SoundGear devices. When your
SoundGear devices are not powered on,
incoming calls route only to your smartphone.
iOS allows you to select a preference for
how audio (call audio and media audio)
is routed from your smartphone to your
SoundGear devices.
Microphone Use while Streaming
When an audio stream starts, the
microphones on your SoundGear devices
will automatically mute. The microphone
volume will go back to the previous settings
when the audio stream stops. To modify the
microphone volume while streaming, simply
use rotary volume control on your SoundGear
device. For iOS devices, you can also use the
native iOS controls.
To Next Page
Loading...