Use with Mobile Phone | 21 20 | Use with Mobile Phone
2.4 2-Way Audio (iOS only)
Your SoundGear devices are equipped with
2-Way microphones. The 2-Way Audio will
be enabled by default when connected to
your iOS device. SoundGear devices will
pick up and stream your voice directly back
to iPhone and iPad. Allowing for hands free
communication.
2-Way Audio is solely controlled via Apple
®
native controls. Native controls can be
accessed via a triple-click or from Control
Center. 2-Way Audio is labeled “Mic Input”.
2-Way Audio Mic Input Options
On: iOS is using the device microphone for
voice pick-up during a call.
Off: Device user is required to speak into
iPhone or iPad microphone during calls.
Call audio is still streamed to the devices.
NOTE: This setting cannot be changed
during an active phone call.
2-Way Audio will stream based on the Mic
Input option that was selected from Control
Center in your phone settings.
For the best streaming experience, iPhone or
iPad should be within approximately 10 feet
(3 meters) of the user.
When a phone call comes in, you can answer
the call using your iPhone, iPad, or with a
short press to the button on your SoundGear
device.
If you are already on a call, and a new call
comes in, a short press of the button on the
device will answer the new incoming call,
while a long press of the button on the device
will decline the incoming call.
To end any call, simply press and hold the
button until the call ends.
For any questions related to microphone
function or control while streaming, please
contact SoundGear Customer Support
for assistance.
To Next Page
Loading...