SoundGear Phantom - Device Pairing and iOS Controls; Pairing SoundGear with iOS Devices

Pairing | 17 16 | Pairing
2.1 Pairing your SoundGear devices
to your iOS device
1. Ensure the Bluetooth setting is enabled
on your iOS device. Within the Settings
menu go to Bluetooth and toggle to On.
2. Locate, then tap the Settings icon on your
iOS device.
3. Within the Settings menu go to Settings >
Accessibility > Hearing Devices.
4. While the iOS device searches for the
SoundGear devices, press and hold the
power button to power the devices on
(approx. 5 seconds). This will put the
devices in pairing mode for 3 minutes
after turning on.
5. If your SoundGear devices do not appear
in the “Devices” list within 5–7 seconds,
tap Accessibility in the upper left corner,
then tap Hearing Devices.
Native iOS Controls
You are now ready to use your iOS device to
adjust your SoundGear device.
To access the native iOS controls, triple click
the Home button on your iOS device. From
this screen you can adjust the volume or select
a memory.
Right Volume/Left Volume allows you to
increase and decrease Microphone Level for
each SoundGear device individually.
Select any memory shown in the list to change
the SoundGear device to that memory setting.