EasyManua.ls Logo

SoundGear Phantom - User Controls: Power and Volume

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Controls | 27 26 | User Controls
5.1 Power On & Off
ON - To power the devices on, simply press
and hold the power button until the
devices power up (Approx. 5 seconds).
You will hear the power up chimes,
indicating that the devices are turned on.
OFF - The SoundGear devices will power
off automatically when placed on the
charging posts. Charging will proceed.
OFF - The SoundGear devices can be powered
off manually by pressing and holding
down the push button for 3 seconds.
5.2 Auto Off
Your SoundGear devices support the ability
to automatically turn off due to inactivity.
Place your SoundGear device on a flat, stable
surface (e.g., a table) with the tip facing
upwards and it will power off after about 15
minutes. You will need to manually power the
devices back on if they have turned off due to
inactivity.
5.3 Rotary Volume Control
Your SoundGear device is
equipped with a rotary
volume control. To make
volume adjustments, use
your fingertip to rotate
the volume control.
1. To make sounds
louder, rotate the
control forward,
toward your nose.
2. To make sounds
softer, rotate the
control backwards,
toward the back of
your head.
Increase Volume
Decrease Volume