Device Care | 31 30 | Device Care
6.1 SoundGear Device Care
Keep your SoundGear devices clean at all
times. Heat, moisture and foreign substances
can result in poor performance.
• Clean over a soft surface to prevent
damage from a fall
• Use the provided cleaning brush
to clean debris from around the
microphone and receiver
• Never use water, solvents, cleaning fluids
or oil to clean your SoundGear devices
If needed, your SoundGear dealer or
SoundGear Customer Support can provide
further information on additional maintenance
procedures for your SoundGear devices.
Helpful Hints
• Do not take apart your SoundGear
devices or insert the cleaning tools
inside them
• When not in use, place SoundGear
devices in charging case or carry case
and store:
– In a dry, safe place
– Away from direct sunlight and heat
to avoid extreme temperatures
– Safely out of reach from children
and pets
Hear Clear Receiver Wax Guards
SoundGear devices utilize disposable Hear
Clear earwax protection. The innovative wax
guards prevent earwax accumulation in the
SoundGear device receiver.
When you need to replace your wax guards,
please follow the instructions below.
1. Insert the empty end of the application
stick straight into the used wax guard in
the SoundGear device.
2. Pull straight out (do not twist) to remove
used wax guard.
3. Use the opposite end of the stick to firmly
insert the clean wax guard straight into
the SoundGear device.
4. Pull straight out (do not twist) to remove
the stick and discard.
See page 32
To Next Page
Loading...