Spa Builders SC-CF-SBD - Factory Default Settings

SC-CF-SBD Owner’s Manual44
Factory Default Settings
- Filter cycle duration: 6hrs
- Jumper default settings: J1= HC
J2= Fº
J3= 2 Pump system
(or 1 Pump and 1 Blower)
- Pump 1: 120V output
- Pump 2: 120V output
- Ozonator: 120V output
- 240V= 4Kw Heater
- 120V= 1Kw Heater
- J&J color connector for pump 2,
1 speed connector installed
- Additional J&J color Blower connector plug
also supplied
- Water temperature at 95ºF
Filter Cycle
Jumpers
Outputs
Heaters
J&J
Set Point