15SC-CF-SBD Owner’s Manual
Installation
Overlays
Installation
Note:
To properly install an overlay
on a keypad, you only need a
hair dryer, paper towel and
rubbing alcohol.
First, peel off the plastic film
that protects the LED display
window.
Please note that the following installation procedure is similar
for K-18 and K-19 pack overlays.
Make sure to select the overlay that goes with your spa
configuration.
Single pump system
K-18 overlays
K-19 overlays
Dual pump systems
Pump & Blower systems
Single pump system
Dual pump systems
Pump & Blower systems
To Next Page
Loading...
