Specialized SHIV - 4.3 Installing the Rear Brake Assembly

Page 20 of 25
10. Place the cable noodle
G
in the cable noodle guide and trim the cable housing so that it has a smooth path to the cable noodle that’s as short as
possible while still fully seating in the noodle. Make sure it stays fully seated through the entire range of the brake, from closed to open.
4.3 INSTALLING THE REAR BRAKE ASSEMBLY
11. Install the rear brake arms, following the same steps as the front brake installation.
TECH TIP: Remove the crank to ease installation and adjustment of the rear brakes.
12. Place the cable noodle in the cable noodle guide and trim the cable housing so that it has a smooth path to the cable noodle that’s as short as
possible while still fully seating in the noodle. Make sure it stays fully seated through the entire range of the brake, from closed to open.
G