DVR-IP4CF
16
8.2 System Setup
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor.
3. Press《ENTER》button to proceed.
4. Press《MENU》button to exit “System Setup”.
5. “System Setup＂is situated on the second menu layer. Under this menu layer user
may setup the system time, password, and return system to default value, etc
(VERSION displayed represents the FIRMWARE version).
SYSTEM SETUP ■■
> TIME SET
PASSWORD SET
LOARD DEFAULT
VERSION V1.0
PRESS(< >), THEN (ENTER)
PRESS (MENU) TO EXIT
To Next Page
Loading...
