Speco DVR-IP4CF - Load Default Settings

DVR-IP4CF
20
8.2.3 LOAD DEFAULT
1. Press《ENTER》button to show the display above.
2. Press《ENTER》button the message《ALL SETTING DATA IS INITIALIZED》
will be displayed by flashing 3 times, and returns to default value. When reset
procedure has been completed, the message“DVR RESET COMPLETED
TURN OFF AND ON THE DVR＂will be displayed, please restart the DVR.
3. Press《MENU》button to exit “Load Default Setup” selection.
■■■
PRESS (ENTER) TO RESET
PRESS (MENU) TO EXIT