DVR-IP4CF
26
1. Cursor (V) position indicates the current function selected.
2. Use《←》and《→》button to move the cursor to the desired item (time).
3. Use《ENTER》button to make changes.
4. Use《MENU》button to exit “SECHDULE RECORD MODE” selection.
5. T: Time, indicates continuous record.
6. M: TIME+MOTION+SENSOR.
(1) When motion has been detected, it will be recorded by “Motion Record
Speed”.
(2) When sensor has been triggered, it will be recorded by “Sensor Record
Speed”.
(3) Otherwise, it is recorded by “Time Record Speed”.
7. A: MOTION+SENSOR
(1) When motion has been detected, it will be recorded by “Motion Record
Speed”.
(2) When sensor has been triggered, it will be recorded by “Sensor Record
Speed”.
※ When both “MOTION” and “SENSOR” has been triggered, it will be
recorded by “Motion Record Speed”.
To Next Page
Loading...
