SPECTRA SERIES 53
14.3 REMOTE CONTROL ASSIGNMENT (LIBERATOR ONLY)
Sections [721] to [728]
These sections are used to assign up to eight remote controls to the system. After assigning a remote control to the
system, you must assign a User Access Code and define which actions will be performed by the remote control’s
buttons as explained on page 52. To assign a remote control, enter the remote control’s 6-digit serial number into
the appropriate section where sections [721] to [728] represent remote control numbers 1 through 8. Use the Serial
Number Display method described on page 49 to determine the remote control’s serial number.
14.3.1 D
ELETING
R
EMOTE
C
ONTROLS
(
LIBERATOR
ONLY
)
To delete a remote control, enter a value of 000000 into the appropriate section where sections [721] to
[728] represent remote control numbers 1 through 8 respectively.
14.4 REMOTE CONTROL ASSIGNMENT (1758 AND 1758EX ONLY)
Sections [731] to [738]
These sections are used to assign up to eight remote controls to the system. After assigning a remote control to the
system, you must assign a User Access Code and define which actions will be performed by the remote control’s buttons
as explained on page 52. To assign a remote control, enter the appropriate section where sections [731] to [738]
represent remote control numbers 1 through 8. Then press a button on the remote control twice, the keypads will emit a
confirmation beep. If you hear a rejection beep, an error has occurred or the remote control has already been assigned.
14.4.1 DELETING REMOTE CONTROLS (1758 AND 1758EX ONLY)
To delete a remote control, enter the appropriate section where sections [731] to [738] represent remote
control numbers 1 through 8, then press the [
FORCE
] key.
Table 8: Button Programming
Sections
[711] - [718]
Button or Button Combination
1st Digit = Button A
2nd Digit = Button B
3rd Digit = Button C
4th Digit = Button D
5th Digit = Buttons A & B pressed simultaneously
6th Digit = Buttons C & D pressed simultaneously
7th Digit = Buttons A & C pressed simultaneously
8th Digit = Buttons B & D pressed simultaneously
Table 9: Button Options Table
Digit Value = Button Action
1 Regular Arm
2 Stay Arm
3 Instant Arm
4 Force Arm
5Disarm
6 Disarm when there is no alarm
7 Regular Arm and Disarm
8 Generate a Panic 1 Alarm (Police)
9 Generate a Panic 2 Alarm (Medical)
A Generate a Panic 3 Alarm (Fire)
B Activates any PGMs that have Event Group #07 as their Activation Event
C Activates any PGMs that have Event Group #08 as their Activation Event
D Activates any PGMs that have Event Group #09 as their Activation Event
To Next Page
Loading...
