44
7030-0068-26
28Jul16
Customer Service, Canada/US (719) 633-8333 / (800) 231-0978
Customer Service, Europe +31 33 434 7050
CVX-300
®
Excimer Laser System Version 26 Operator’s Manual
English / English
12. If the system has been in the Ready mode for ve minutes without lasing, it returns to
Standby mode.
Power Down
1. Press the Standby button.
2. Turn the keyswitch to the OFF ( ) position.
3. Disconnect the power cord from the power source.
4. Disconnect and store the Footswitch in the front storage compartment.
5. Close the catheter connector door.
6. Clean detector face with alcohol prep.
7. When not in use, the laser system should be protected from unqualied use by
removing the key.
8. Cover the laser system.
Fault Codes
When a fault is detected by the system, a code number is displayed in the middle of the
display window corresponding to the appropriate fault. Refer to the Troubleshooting
Section of this manual. Always record the fault code number and report it to Spectranetics
Customer Service.
To Next Page
Loading...
