SphygmoCor XCEL - Page 8

Page 8
Error Code
Error Message
Action
problem (Code = 90).
 Ensure the data/power input are
connected
 Turn the device ON
After completing the above steps, attempt
another measurement
103*
File “DatabaseUpgradeReport.csv”
is in use by other application
(code=103)
Close the application
608*
Unable to backup database to
<pathname> (Code = 608).
 Select a different folder for backup
(preferably at the local PC instead of the
network), and then attempt to backup the
database again
609*
Unable to restore database from
<pathname> (Code = 609).
 Copy the backup file in a different folder
(preferably at the local PC instead of the
network)
 Try to restore from the new location of the
backup file.
611*
Unable to migrate data due to
database error (Code = 611).
 Ensure that the PC can locate the SQL data
server.
 Restart the SphygmoCor XCEL software.
800*
Database server is not responding
(Code = 800).
 Restart the computer
 Insert the SphygmoCor XCEL installation
DVD
 Select Create Database and follow the
instructions on the screen.
2046
Unable to continue Capture due to
unsuccessful start of capture (Code
= 2046).
 Ensure that the device is connected to the
computer.
 Ensure the cuff is connected to the device.
 Ensure that there aren’t any tubing
obstructions
 Turn the device OFF and ON.
 Attempt Capture again.
2047
Unable to continue Capture due to
unsuccessful stop of capture (Code
= 2047). "Press the STOP
button on the module to deflate
 Ensure that the device is connected to the
computer
 Ensure that the cuff is connected to the
device.