Operation Manual – Spider ILD02 EFI
11.17
CHANGING THE WHEEL
•
Change the wheels on a level, firm surface
•
Turn the wheel so that the tightening nuts are
accessible from the outside
•
Stop the engine, remove the key from the ignition
•
Secure the machine against movement.
•
Lift the mower and support it under the cutter deck
•
Ensure the machine is safe & supported before
working on it.
•
Loosen the wheel nuts, remove the wheel
•
After repairing it, attach the wheel back in the
reversed order.
•
Use suitable tools to unscrew the nuts
11.18
TYRE PRESSURE
Keep the specified tyre pressure. Other values may unfavorably influence
the riding characteristics especially on slopes. You may even lose control
of the machine.
Recommended and max. tyre pressure is 300 kPa / 3,0 bar / 43 PSI
11.19
MOWING HEIGHT ADJUSTMENT MECHANISM
Keep the moving parts of the slide way clean,
undamaged and without an excessive clearance.
To Next Page
Loading...
