SPIDER ILD02 EFI - Lubrication, Cleaning, and Torque Specs; Lubrication and Cleaning Procedures

Operation Manual – Spider ILD02 EFI
43 / 55
rev. 01-01-02-2021
11.20 LUBRICATION
Use adequate amount of lubricant on parts, which are to be lubricated. Excessive lubricant tends to drop
down and pollute both the machine and the environment. Insufficient amount requires frequent lubrications.
11.21 CLEANING THE MACHINE
Cleaning the whole machine by a power washer or similar is not recommended. Water under pressure may
penetrate inside electrical parts, fuel system, air filter and cause malfunction.
Wipe other parts with cloth or brush.
Do not use gasoline or other oil products for cleaning.
11.22 TORQUE CHART
Connection bolt
M 6
M 8
M 10
M 12
M 14
M 16
M 20
Wheel
nut
Blade
bolts
Torque /Nm/
10
25
50
85
135
215
410
50
60
Chain lubricant: INTERFLON FIN LUBE TF
Lubricating grease:
Mobilgrease XHP 222