10
2.6 Information line
The information line will show 'PPM' or 'US / CM' and will alternate with information about
alarms or the TDS / Bottom Blowdown Valve status.
If an alarm occurs, the TDS / Bottom Blowdown Valve status will not show. 'ALARM' will be
shown first followed by the type of alarm. See Section 9 – 'Fault finding' for types of errors.
Example of alarm status:
7000
PPM
7000
ALARM
7000
HIGH TDS
If a bottom or TDS blowdown occurs, 'BLOWDOWN' will be displayed, followed by the type
of blowdown.
Example of valve status:
5100
PPM
5100
BLOWDOWN
5100
HIGH TDS
If both the bottom and TDS blowdown occurs, the display will show the following:
5100
PPM
5100
BB DOWN
5100
HIGH TDS
5100
BLOWDOWN
To Next Page
Loading...
Need help?
General
