Spirax Sarco BC3250 - 2.8 Alarm; Error Display Messages; 2.9 Equipment Delivery, Handling and Storage

IM-P403-89 EMM Issue 8
13
20
PURGE S
Shows purge time (probe in pipeline).
Flashes PURGE and 'S' (seconds).
Pressing the ' ' or ' ' opens the blowdown valve for the purge time or 1 minute.
10
CLEAN S
Shows the cleaning time selected. Flashes CLEAN and 'S' (seconds).
Pressing the ' ' or ' ' to active the cleaning cycle and the blowdown
valve will close.
CLEAN is shown only if clean time > 0
30
TIMER S
Timer - duration - set. Shows the bottom blowdown time selected by the
user (in seconds).
Timer - duration - set is shown only if timer duration > 0
29
TIMER S
Timer - duration – now. Shows elapsed duration time (in seconds).
Timer - duration – now is shown only if timer duration > 0
11
TIMER
Timer - interval – now. Shows elapsed interval time (in hours, minutes
and seconds).
Timer - interval – now is shown only if timer duration > 0
ERROR:
POWEROUT
If there are any problems with the product, error or alarm will appear. The
example shows a power failure.
12
TIMER HRS
Timer - interval – set. Shows interval time selected by the user (in hours).
Timer - interval - set is shown only if timer duration > 0
Please note that the display will always revert to displaying the current conductivity
or TDS valve if a button has not been pressed for 2 minutes.