52
6.4.13 TEST OUTPUT sub-menu
TEST
OUTPUT
RETRANS
TEST
OUTPUT
VALVE
TEST
OUTPUT
BBVALVE
TEST
OUTPUT
ALARM 1
TEST
OUTPUT
CANCEL?
Enables the output to be adjusted between 4 mA and 20 mA to test
the system.
Energises / de-energises the TDS valve relay for test purposes.
Energises / de-energises the bottom blowdown valve relay for test
purposes.
Energises / de-energises the alarm relay for test purposes.
Resets the system to automatic control. (The system automatically
resets after five minutes). Press
OK
to select Reset
SOFTWARE VERSION sub-menu
Allows the software version to be viewed.
SW VER
PASS CODE sub-menu
SET PASS
TREND
This allows the default pass code to be changed to a user-defined
value. It is important that if the default pass code is changed that the
new value is noted and kept safe.
Shows the historical conductivity level graphically. Timebase can be
selected – minutes, hours, or days.
Scroll using the and buttons, then press the button to select
the timebase and return to the main menu.
TREND sub-menu
To Next Page
Loading...
