Matrix 908 Field Computer
39
98-01578-ENUS R2
CONSOLESTART JOB SETUPHELP MEASUREMENTSUT START JOB
Guidance Bar
On Screen Lightbar
Used to represent the distance away from the
guideline or vehicle.
To congure the lightbar availability, display mode
or lightbar spacing, from the Main Menu go to
Guidance Settings -> Lightbar.
Navigation Activity
GNSS Status & Current Activity
• Displays “No GNSS” when GNSS is unavailable,
or “Slow GNSS” when GNSS is receiving GGA
data at less than 5Hz.
• Displays activities such as mark an A or B point
Cross Track Error
Displays the distance from your desired guideline.
To change the format in which the distance is
displayed:
1. Press the Navigation Activity box.
2. Select the measurement format.
Selectable Job Information
X Speed – displays the current speed of travel
X Heading – displays the course of travel based
clockwise from a true north baseline. North = 0°,
East = 90°, South = 180°, West = 270°.
X Total Applied Area – displays the total
accumulated area that has had product applied,
including double-coverage areas
X Swath Number – displays the current swath
number in reference to the initial AB guidance
line, facing in the direction from A to B. Number
will be positive when the vehicle is to the right of
the AB baseline, or negative when the vehicle is
to the left of the AB baseline.
X Nudge Offset – when Assisted/Auto Steering
and Assisted/Auto Steering Nudge are both
enabled, displays the total accumulated nudge
offset distance
Selectable Job Information
On Screen Lightbar Navigation Activity
To Next Page
Loading...
Need help?
General