Walk left/right
Turn the working mode switch to the middle walking mode.
● Forward: Push the left handle (5) and the right handle (6)
forward at the same time.
● Back: Pull the left and right handles backward at the same time
●Neutral position: Loosen the two handle levers at the same time,
the handle returns to the neutral position, the machine stops walking
and brakes.
● Turn left: Release the left handle and push the right handle
forward.
● Turning right: Release the right handle and push the left
handle forward.
● Rotation: Operate the two walking handles in opposite
directions, the left and right crawlers run in opposite directions, and the
machine rotates.
Note: The machine should select low speed when turning, and not
turn at high speed.
Walking high/low speed switch (No. 15)
●Low speed: Turn the switch down to the "LOW" position, and the
walking speed will change to low speed.
●High speed: Turn the switch up to the "HIGH" position, and the
walking speed will change to high speed.
Note: You can adjust the walking speed by changing the handle
range or throttle size.
To Next Page
Loading...