Please strictly follow the above steps in order to avoid danger
When disassembling the hydraulic fly jib, you must ensure that the plug D is completely
inserted into the fixing hole before removing the plug A3, A4. When installing the hydraulic
fly jib, you must ensure that the plug A3, A4 is completely inserted into the fixing hole
before removing the plug D. In order to prevent the hydraulic fly jib from falling off,
causing a safety accident.
D
E
Step four:
1.Rotate the fly jib around D at a small
angle to the corresponding position and
insert the pin E and the anti-drop pin.
To Next Page
Loading...