3. Start the engine
1. Insert the key into the master key switch on the operation
console. At this time, in the "stop" position, turn clockwise to the "on"
position, the crane circuit is turned on, and the display shows the
machine working condition information.
2. Turn the remote control/manual switch of the console up to the
remote control mode, release the hand, the switch remains in the
remote control mode position, and the remote control indicator lights
up.
3. Turn the emergency stop switch of the remote control clockwise,
and the switch will move up to the off position.
4. Long press the horn button of the remote control, and release
the horn button when you hear a beep.
5. Pull the accelerator on the console backward to run the engine
at a medium speed (throttle lever is in the middle position).
6. Long press the engine start button on the remote control. After
the engine starts, release the button and the engine start is complete.
To Next Page
Loading...