Maintenance Waukesha Cherry-Burrell
®
Brand C-Series Pump
01/2019 95-03008-IEC Page 41
9. While pushing the impeller back, keeping the shim tight
between the impeller and the backplate, tighten the screws
on the shaft collar.
Torque the shaft collar screws to the specified torque.
Figure 91 - Tighten screws
Figure 92 - Torque shaft collar screws
IEC Motor Frame Tool Size
Shaft Collar Screw
Tor
que, N·m
D71/D80/D90L/
D100L/D1
12M
3/16” Allen 26
D132S/D160L/M 1/4” Allen 52
D180M 5/16” Allen 95
To Next Page
Loading...
