Maintenance Waukesha Cherry-Burrell
®
Brand C-Series Pump
01/2019 95-03008-IEC Page 47
Install the pump casing and guard
1. Place the lubricated casing gasket onto the pump backplate.
2. Figure 113 shows the casing gasket installed.
3. Install the casing onto the pump.
NOTE: If ne
cessary, use a soft rubber mallet to line up the
casing.
4. While holding the casing in place, install the casing clamp.
Figure 112 - Place casing gasket onto
backplate
Figure 113 - Casing gasket installed
Figure 114 - Install casing
Figure 115 - Install casing clamp
To Next Page
Loading...
