CELL-LINKSPYPOINT
14
NOTE
We strongly recommend that you mount your CELL-LINK directly above
your camera leaving as little space as possible between the two. Doing so will
reduce the risk of having animals damage the cable.
If your cable with SD adapter (#CL-CBL) is damaged, you can order
a replacement directly via our website www.spypoint.com.
OPERATING VALIDATION TEST
Run a test to make sure everything works properly.
• Make a movement in front of your camera so that it takes a photo.
• The STATUS LED should turn green, indicating that the CELL-LINK
is communicating with the cellular network.
• Wait 15 minutes at most and you should then be able to view the photo
in the SPYPOINT app.
Installation
To Next Page
Loading...
