CELL-LINKSPYPOINT
9
ATTACH THE ANTENNA
When buying the CELL-LINK, the antenna comes in the box and is detached
from the device. To attach it, follow the next steps:
1. Remove the cap which covers the antenna connector of the CELL-LINK.
2. Screw the antenna in the connector by turning it clockwise.
ACTIVATING YOUR CELL-LINK
You have to activate your CELL-LINK before you can use it. To do so,
you will need the activation code.
FINDING THE ACTIVATION CODE
The activation code is located inside the CELL-LINK’s battery compartment door.
Activation code
Preparation
To Next Page
Loading...
