Spypoint CELL-LINK - Configuring Your CELL-LINK Settings; Using the SPYPOINT App for Configuration; First Transfer Time Setting; Transfer Frequency Setting

CELL-LINKSPYPOINT
15
FIRST TRANSFER TIME
All possible combinations
Allows you to choose the time when the device makes its rst transfer of the day.
Note: the device transfers are congured by default with 4-hour intervals, determined from the time you
activated your device. For example, if your device was activated at 1:42 p.m., the next transfer will be at 5:42 p.m.
TRANSFER FREQUENCY
1; 2; 6; 12; each detection
Allows you to choose the number of transfers the device performs each day.
DEVICE NAME
All possible values
Allows you to name the device for easy identication. This function is very useful for users with more
than one device.
DATE FORMAT
MM/DD/YYYY or DD/MM/YYYY
Allows you to choose the date format displayed.
TIME FORMAT
12 h or 24 h
Allows you to choose the time format displayed.
TEMPERATURE UNIT
°C/°F
Allows you to choose the temperature unit format displayed.
REPORTED STOLEN
ON / OFF
Report the device as stolen.
BUCK TRACKER
ON / OFF
Activate the BUCK TRACKER.
BATTERY TYPE
AA / AA-LIT / 12 V / LIT-10
Allows you to select the correct type of battery used to ensure a more accurate reading of the battery charge level.
RESET TO DEFAULT SETTINGS
Activated/not activated
Allows you to reset the device to its original state.
Configuration
CONFIGURATION
Use the SPYPOINT app to congure your device.