Spypoint CELL-LINK - Verifying Device Status and Notifications; Verifying Device Status; Understanding Device Notifications; Application Status Page Details

CELL-LINKSPYPOINT
16
Verification
VERIFYING DEVICE STATUS
Dierent tools are available to help you check the status of your
CELL-LINK and to inform you of any problems that may occur
during its operation. In this section, we will see 3 tools:
NOTIFICATIONS
The device was designed to send notications to your SPYPOINT app.
This is to help you stay informed of the status of your device.
You will receive a notication on your smartphone for the
next transfer when:
• You forget to insert a microSD card in your device.
• The inserted microSD card is not compatible with your device.
• The batterie charge is too low.
APPLICATION STATUS PAGE
Here are the dierent indicators of the CELL-LINK status you have access to.
They are accessible on your app or on the SPYPOINT website.
SIGNAL
Strength of the cellular signal
1 - 5 bars
BATTERY
Charge level
0 - 100%
(LIT-10/12 V)
SD CARD
Used space
0 - 100%
POSITION
GPS
GPS coordinates
MODEL
CELL-LINK
VERSION
Displays the software version
VX.XX.XX
LAST COMMUNICATION
The date and time of the last device transfer
Date and time
NUMBER OF PHOTOS TAKEN THIS MONTH
XXXX
TEMPERATURE
°C or °F
LAST INSTALLATION
Last time your device was turned ON
Date and time
SIM
Number on your SIM card
89……
ACTIVATION CODE
XXXX-XXX-XXXX
